574 Benutzer online
28. März 2024, 09:25:48

Windows Community



 Antworten / AufrufeThemen mit dem Stichwort gowindows
0
Antworten
2805
Aufrufe
Windows 10: Vorbereitungs-Update für Windows 8 und Windows 8.1
Begonnen von admin
07. April 2015, 19:55:04
Windows 10: Vorbereitungs-Update für Windows 8 und Windows 8.1 [iurl]http://www.go-windows.de/windows/windows-10-vorbereitungs-update-fuer-windows-8-und-windows-8-1/[/iurl]

windowswindows go-windowsgo-windows vistavista problemproblem problemeprobleme winwin ymsyms funktioniertfunktioniert treibertreiber keinkein hilfehilfe d2sd2s updateupdate win7win7 bgebge softwaresoftware zwuzwu d2kd2k searchsearch bingbing microsoftmicrosoft windowwindow computercomputer bgqbgq 8382954283829542 startetstartet installiereninstallieren downloaddownload yahooyahoo windows7windows7
2
Antworten
6360
Aufrufe
Bildschirm ist schwarz, aber Ton ist noch da.
Begonnen von BIGBen
01. Februar 2012, 12:38:48
Ich hab ein Problem:
Und zwar war ich weg und hatte den Rechner angelassen.
Als ich wiedergekommen bin, war der Bildschirm schwarz. (aber
keine Meldung vom Monitor, dass er kein Signal hätte)
Der Ton ist zu hören beim Hochfahren, man hört den Windows-Start-Sound.
Achja und es hatte nach dem ersten schwarzen Bildschirm und Herunterfahren
leicht nach geschmolzenem Kunststoff gerochen.

Ich habe schon probiert, den Monitor an meiner Onboard-Grafikkarte anzuschließen,
dort war allerdings kein Signal, vielleicht weil die Onboardkarte nicht mehr
installiert ist, seitdem ich eine externe Graka angeschlossen habe.

Ich habe den Rechner aufgemacht, einiges an Staub beseitigt und die Grafikkarte
ausgebaut, weil ich denke, dass es entweder an der grafikkarte liegt, oder an
Leitungen auf dem Mainboard. Ich konnte aber nichts erkennen.

Unter dem Kühler der Graka allerdings ist so ein Wärmeleitpad. Das ist in der Mitte, wo
es eigentlich kühlen soll komplett weg (geschmolzen?)
Kann das vielleicht daran liegen?

Ich wäre sehr dankbar für eure Hilfe :D

Liebe Grüße,
BIGBen
6
Antworten
20945
Aufrufe
Programme starten nicht mehr ?
Begonnen von Gero123
17. August 2011, 21:17:39
Hallo,

seit kurzem habe ich ein Problem mit meinem Windows 7...
Wenn ich veruche ein Programm zu starten (Opera, Firefox, League of Legends, Installaions Dateien), bricht der start des Programmes ohne Fehlermeldung ab.
Die Programme neu zu installieren habe ich bereits versucht, das ist jedoch erfolgslos verlaufen, da die Installer nach dem Extrahieren einfach zu gehen.
Andere Programme (Internet Explorer, Windows Media Player usw.) funktionieren jedoch fehlerfrei.
Bemerkenswert ist, dass scheinbar die Programme, die einen starter haben, also nach start ein aderes Programm aufrufen nicht funktionieren.

Reboot : Erfolglos
Konto Wechseln : Erfolglos
sfc/scannow : Erolglos

Bitte um Hilfe ... !
4
Antworten
21110
Aufrufe
AMD Catalyst 10.10
Begonnen von ossinator
24. Oktober 2010, 09:25:16

Neu daran ist, dass es ab 10.10 zwei Versionen gibt. Die normale Catalyst Software Suite und AMD Catalyst Accelerated Parallel Processing (APP) Technology Edition. Dieses Paket enthält die OpenCL-Laufzeitumgebung. Dadurch wird die bisherige Marke ATI Stream ersetzt.

Neu ist auch die Unterstützung von 3D-Blu-ray-Discs. Allerdings erst ab der Radeon HD 6800 Serie.

[url=http://sites.amd.com/us/game/downloads/Pages/radeon_win7-32.aspx#2][color=blue][b]Windows 7 & Vista, 32 Bit: Catalyst 10.10[/b][/color][/url]
[url=http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#2][color=blue][b]Windows 7 & Vista, 64 Bit: Catalyst 10.10[/b][/color][/url]

[url=http://sites.amd.com/us/game/downloads/Pages/radeon_xp-32.aspx][color=blue][b]Windows XP, 32 Bit: Catalyst 10.10[/b][/color][/url]
[url=http://sites.amd.com/us/game/downloads/Pages/radeon_xp-64.aspx][color=blue][b]Windows XP, 64 Bit: Catalyst 10.10[/b][/color][/url]

[size=8pt][i]Danke an Pebro1[/i][/size]
0
Antworten
19210
Aufrufe
ATI Catalyst 10.9
Begonnen von ossinator
16. September 2010, 09:20:42
Der Treiber bringt neue Einstellungsprofile für "Aliens vs. Predator", "Battlefield: Bad Company 2", "F1 2010" und "Kane & Lynch 2" mit.

[b]Behobene Fehler:[/b]

[list]
[li]UVD clocks will now return to normal speeds after switching from HD to SD content [/li]
[li]Flickering no longer visible while running 3D games on HDMI displays with Quad CrossFire™ enabled[/li]
[li]Mesh corruption is no longer visible in "The Chronicles of Riddick 2: Assault on Dark Athena" when SSAO in-game setting is set to high[/li]
[li]CrossFire™ now functions properly and in-game Anti-Aliasing can now be enabled in "StarCraft II"[/li]
[li]Adobe Flash Player will no longer display green screen after resume from sleep[/li]
[li]Negative CrossFire™ scaling on "Final Fantasy-XIV" no longer occurs[/li]
[li]Intermittent perfomance drops no longer observed with harware cursor enabled in "World of Warcraft" game in extended mode[/li]
[li]AVI video no longer lags during playback within Microsoft PowerPoint slide deck[/li]
[li]Desktop corruption no longer occurs during PowerDVD SD/Blu-ray content playback on 120Hz displays[/li]
[li]Choppy HD playback no longer occurs while changing color vibrance and fleshtone correction in Catalyst™ Control Center - Advanced Color[/li]
[li]Copy protection message will no longer appear when viewing a DVD with Windows Media Player on a Windows XP system with PowerDVD 9 installed[/li]
[/list]

[url=http://sites.amd.com/us/game/downloads/Pages/radeon-win7-32.aspx][color=blue][b]Windows 7 & Vista, 32 Bit[/b][/color][/url]
[url=http://sites.amd.com/us/game/downloads/Pages/radeon-win7-64.aspx][color=blue][b]Windows 7 & Vista, 64 Bit[/b][/color][/url]
[url=http://sites.amd.com/us/game/downloads/Pages/radeon-xp-32.aspx][color=blue][b]Windows XP, 32 Bit[/b][/color][/url]
[url=http://sites.amd.com/us/game/downloads/Pages/radeon-xp-64.aspx][color=blue][b]Windows XP, 64 Bit[/b][/color][/url]
0
Antworten
15904
Aufrufe
AMD Catalyst 10.8b Hotfix
Begonnen von ossinator
10. September 2010, 08:25:40
Catalyst 10.8b behebt ein Leistungsprobleme mit den Dual-GPU-Grafikkarten Radeon HD 4870 X2 und 4850 X2 bei denen es vorkam, dass nur einer der verbauten Grafikchips zum Einsatz kam.

Außerdem erhält man mehr Leistung, wenn man die anisotropische Filterung über das Catalyst Control Center erzwingt.

[url=http://support-prod.amd.com/us/kbarticles/Pages/ATICatalyst108bHotfix.aspx][b][color=blue]Download[/color][/b][/url]
9
Antworten
15733
Aufrufe
Gruppe umbenennen??
Begonnen von Donnie
01. September 2010, 16:18:10
Da Amd von nun an die Bezeichnung für ihre grafikprodukte mit dem namen ATI nicht mehr weiterführt und mein forum unter dem selben namen läuft hoffe ich ihr könnt mir helfen,...
ist es möglich ein forum umzubenennen?? wäre schade wenn ich ein neues gründen müsste,.. (über 160 leute dabei..)


bitte um antwort..

greetz

Donnie
8
Antworten
30119
Aufrufe
Beim Programmstart nicht immer die Admin Abfrage bestätigen müssen
Begonnen von Canon
29. November 2009, 07:34:34
Hallo,

ich nutze Windwos 7 Home Premium 32bit.

Da gibt es ein Programm, dass immer zuerst das Ausführen als Administrator bestätigt haben will.

Ich möchte die UAC nicht grundsätzlich abschalten oder auf eine niedrigere Stufe setzen.

Gibt es eine Möglichkeit, dass lediglich für dieses Program diese lästige Bestätigung abgeschaltet werden kann?
Das müsste doch eigentlich möglich sein - finde aber nichts dazu.

Hoffe auf die Insider unter Euch und Danke Euch.

Schönen Advent .....
10
Antworten
17163
Aufrufe
Probleme mit der Installation von Media Go
Begonnen von ossinator
02. Oktober 2009, 22:05:36
Ich habe mir eine PSP zugelegt und wollte nun das zum Spiele-Download notwendigt Programm Media Go von Sony installieren. Auf meinem Laptop mit XP SP3 läuft es einwandfrei. Da dies nun aber nicht mein Haupt-PC ist wollte ich Media Go auch auf meinem Desktop-PC mit Win 7 installieren. Habe es zunächst im Kompatibilitätsmodus WinXP SP3 probiert. Hierbei wurde während der Installation schon ein Fehler angezeigt, dass einige Feature nicht installiert werden konnten und die Installation daher abbricht.

Gut, habe ich es ohne Kompatibilitätsmodus probiert und die Installation wurde erfolgreich durchgeführt. Beim Start kommt dann aber eine Fehlermeldung (siehe Screenshoot).

Hat jemand eine Idee?

Und wieder mal voll der Nepp... die PSP wird ohne Memorystick ausgeliefert und ist damit fast funktionsunfähig. Alte FW 5.1 drauf (aktuell 6.10) und kann auch ohne Stick nicht aktualisiert werden. Das Einzige was geht, ist Internet und bedingt Zocken mit UMD (allerdings wird nichts gespeichert, da kein Stick vorhanden und es werden alle Einstellungen wieder vergessen).  :-\
2
Antworten
213183
Aufrufe
Windows 7 reparieren Windows 7 Reparaturinstallation
Begonnen von gdi
25. August 2009, 14:52:24
Das Reparieren von Windows 7 funktioniert eigentlich genau so wie bei Windows Vista. Bei Windows 7 werden die Reparatur Programme aber gleich auf die Festplatte geschrieben, so dass diese direkt vom Bootmanager (F8 drücken nach dem Bios) gestartet werden können.  Vorteil dabei ist, dass keine Windows 7 Reparatur-CD bzw. DVD benötigt. Funktioniert die Reparaturkonsole/Reparaturpartition auch nicht mehr bleibt nur der Weg von der Installations-DVD zu starten. Nach Auswahl der Sprache und Tastaturlayout klickt man im nächsten Bildschirm auf "Computer reparieren" bzw. "Repair your computer". Nun werden alle erkannten Windows Installationen angezeigt. Hier wählt man nun eine aus und klickt auf "Weiter".

Es werden nun verschiedene Windows 7 Reperaturmöglichkeiten angeboten:
- Startup Repair - Start-Reparatur
Hier versucht das Windows 7 Setup-Programm automatisch Fehler zu finden, welche verhindern, dass Windows gestartet werden kann. Diese werden dann auch gleich repariert.

- System Restore - Windows 7 System-Wiederherstellung
Hier kann das System zu einem früheren Wiederherstellungspunkt zurückversetzt werden.

- System Image Recovery - Windows 7 Image-Widerherstellung
Hier kann man sein System mit Hilfe eines Abbilder wiederherstellen. Dazu muss man aber ein Abbild unter Windows erstellt haben.

- Windows Memory Diagnostic - Windows 7 Speicherdiagnose
Mit diesem Tool kann man den Arbeitsspeicher auf Fehler überprüfen lassen.

- Command Prompt - Windows 7 Reparaturkonsole
Hiermit startet man die Eingabeaufforderung um manuell Reparaturen am System ausführen zu können.
7
Antworten
22685
Aufrufe
vista(recovery CD) neu installieren ohne Lauwerk D zu löschen
Begonnen von montana55
09. Juni 2009, 01:38:11
Hallo Leute!

...eben, wie soll ich das tun???

Ich habe toshiba satellite, der vista natürlich schon vorinstalliert hatte, recovery cd war dabei. Nun, es ist soweit eine Neuinstallation durchzuführen.
Da meine Freundin auch den selben notebook hat, habe ich erstmal bei ihr versucht ( vorhin hatte ich vista nie installiert) und ich war ziemlich überrascht, dass es ganz anders verlaufen ist, als ich es mir vorgestellt habe. ( Ich habe mich ein wenig schlau gemacht - zumindest dachte ich, ich hätte es...leider nicht).

Vor allem konnte ich nichts auswählen welche partition zu formatieren wäre und  welche da bleiben sollte (wie z.B. beim XP), ohne mich zu fragen hat die Recovery einfach alles gelöscht, da war nix "schritt für schritt" zu sehen, worauf ich idiot vergeblich gewartet habe - vorher hatte ich mir so etwas im internet angeschaut. (Alle daten hatte ich aber vorher auf der externer festplatte gesichert)

Na ja, ich habe ja auch keine orig.Vista DVD, aber troztdem wundere ich mich, das es so verlaufen ist...

Jetzt ist mein laptop an der reihe, und ich möchte unbedingt nur partition C löschen,vista neu installieren aber partition D soll da bleiben! Keine Lust auf backup, das sind milionen von dateien...

Ist das möglich mit Recovery CD? Wenn, dann wie? Ich gebe zu, ich komme nicht zu gut zu recht mit dem ganzen englischen zeug, der da massenweise erscheint während installation (cmd Befehle)...

Ich würde mich freuen, wenn einer von euch etwas dazu sagen würde.

Danke!
14
Antworten
7916
Aufrufe
ALC888 HD Audio und Vista32
Begonnen von Ange1
19. April 2009, 18:11:41
Hallo!

Mein Problem: Der Ton (und manchmal auch das Bild) hat nach ein paar Minuten aussetzer. D.H. das Bild und der Ton bleiben stehen! Das Geräusch ist nervtötend und dauert meist ein paar Sekunden. Wenn ich pech habe bleibt der Ton dauerhaft stehen und dann hilft nur noch das deaktivieren der Soundkarte und ein anschließender Neustart. Auf XP läuft alles reibungslos! Auch auf XP64 gibt es keine Probleme. Vista 64 verhält sich wie Vista 32! Das Problem tritt generell bei Ton auf, ob beim Fernsehen oder beim Musikhören.

Was hab ich bereits gemacht:
Treiber alle von der Treiber-CD installiert, anschließend (weil es nicht funktioniert hat) die neusten Treiber auf der Mainboardseite geladen und installiert. Die Kanäle im Soundmanager umgestellt, jeden Anschluss ausprobiert. Alle Vistaupdates zu dem Thema runtergeladen.
Beim Verkäufer nachgefragt: er meint bei Installation soll ich nicht die von Windows angedachte Treiberinstallation ausführen, sondern nur die von der CD! Hab ich soweit gemacht. Sogar schon neuinstalliert!

Ich hab schon seit Monaten nach einer Lösung gesucht und finde einfach nicht die passende Lösung. Langsam fange ich an Vista nicht als "Freund" sondern eher als "Feind" anzusehen, es will nicht so wie ich....!

Also erstmal ein paar Eckdaten:

Mainboard MSI K9N Neo Digital:

Unterstützt AMD Prozessoren für Sockel AM2:
- Unterstützt AMD Athlon™ 64 X2 DualCore
- Unterstützt AMD Athlon™ 64

- 1x PCI Express x16 Schnittstelle
- 4x Dual Channel DDRII 800/667 (bis 8GB) Speicherschnittstelle


- HDMI Anschluss onBoard (inkl. HDCP Chip)
- DVI-D und VGA Ausgang

AMD SB600 Southbridge
- 4x S-ATA II
- 1x IDE 133
- 1x Gigabit LAN
- 10x USB 2.0
- 2x FireWire
- 7.1 HD Audio Kanal (Realtek ALC888)
- ACPI 2.0 kompatibel

außerdem:

2 SATA Festplatten
Grafikkarte: Gainward Geforce 8600GT
4GB DDR2 Ram
Technisat SkyStar 2 (DVB-S TV-Karte)

Software:
Da ich den Rechner neu aufgesetzt habe ist noch weiter nicht viel installiert. Da das Soundproblem vorher schon aufgetreten ist, habe ich mich auf das "wesentliche" beschränkt um den Ton zu testen. Das gleiche!

So, ich hoffe ihr könnt mir helfen und ich irgendwann mal meine Vistaabneigung ablegen.

Lg Svenja

32
Antworten
10551
Aufrufe
go-Windows Mein PC Update: Jetzt in 2 Minuten Profil automatisch anlegen
Begonnen von paeppi
28. März 2009, 05:02:27
« 1 2 3
Vor einigen Wochen habe ich euch die neue Version von go-Windows Mein PC unter [url]http://meinpc-beta.go-windows.de[/url] vorgestellt.

Jetzt ist das erste major Upgrade fertig, und das neue Feature lautet: Erstellen von PC-Profilen durch den Import von "SIW - System Information for Windows"-Daten. SIW ist Freeware und unter [url]http://www.gtopala.com[/url] zum Download erhältlich.

SIW bietet die Möglichkeit, Informationen über euer System in eine XML-Datei zu exportieren, die ihr dann bei go-Windows Mein PC importieren und damit euer Computerprofil füllen könnt.

[img]http://meinpc-beta.go-windows.de/Images/screen1.jpg[/img]

Ich hoffe, diese Erleichterung gefällt euch und ihr habt genau so viel Freude bei der Verwendung wie ich sie beim Coden hatte.
36
Antworten
20390
Aufrufe
go-Windows Mein PC: Neue Version, neue Forensignaturen, neue Features
Begonnen von paeppi
02. März 2009, 19:09:25
« 1 2 3
Schon seit langem bietet euch go-Windows die Möglichkeit, die Daten eures PC's in den Bereich "[iurl=http://meinpc-beta.go-windows.de]meinPC[/iurl]" einzutragen, und euch daraus Forensignaturen generieren zu lassen.

Viele von euch nutzen diese Forensignaturen, was uns sehr freut. Der Erfolg von "Mein PC" hat uns motiviert, eine neue, viel mächtigere Version davon zu schreiben.

Die Hauptneuerung ist, dass ihr nun nicht mehr nur ein paar wenige Daten eures PC's eintragen könnt, sondern so gut wie alles!  :wink
Die von euch eingegebenen Daten werden nicht mehr nur zur Generierung von Forensignaturen benutzt, sondern euer PC erhält nun ein "Profil", in dem andere alle von euch angegebenen Daten sehen können. Andere Benutzer können deine PC-Profile ansehen, Kommentieren und bewerten.

Die besten PC's (nach Bewertung, Leistung, ...) werden in Ranglisten zur Schau gestellt.

Ein PC-Profil sieht z.B. so aus:

[iurl=http://meinpc-beta.go-windows.de][img width=640 height=630 alt=MeinPC]http://meinpc-beta.go-windows.de/screen1.jpg[/img][/iurl]

Natürlich sollten auch die Forensignaturen nicht zu kurz kommen, da diese ja die Kernfunktion des alten "Mein PC" waren.

Neben den alten Forensignaturen gibt es jetzt insgesamt 13 neue, weitere werden folgen. Einige der neuen Signaturen seht ihr hier:

[iurl=http://meinpc-beta.go-windows.de][img]http://meinpc-beta.go-windows.de/screen2.jpg[/img][/iurl]

Wir hoffen ihr findet Freude an unserem neuen "Mein PC"-System. Schaut doch einfach mal rein, wie es euch gefällt: [iurl=http://meinpc-beta.go-windows.de]http://meinpc-beta.go-windows.de[/iurl]

Einen kleinen Nachteil am neuen System möchten wir euch von Anfang an nicht verschweigen:
Wegen der Komplexität des neuen Systems ist es nicht mehr möglich, die go-Windows.de-Forenaccounts weiterhin mitzunutzen, sondern ihr müsst euch eigens anmelden. Aber das ist es doch wohl allemal wert, oder?

[b]Über einen kleinen Kommentar (egal ob negativ/positiv) würden wir uns sehr freuen!!!
und natürlich auch über Verbesserungs-Vorschläge!!![/b] :wink
14
Antworten
8051
Aufrufe
Vista x64 Problem :(
Begonnen von zweipackk
01. März 2009, 17:29:48
Hallöchen

Habe folgendes Problem mein OS Vista x64 stürzt öfters unerwartet ab, dabei ist es egal welche Anwendungen laufen oder nicht ist also kein Softwareproblem. Ich habe auch Prime95 24h laufen lassen können und es gab absolut keine Probleme oder Bluescreens. Auch Memtest86 fand keine Fehler. Ich bin wirklich am verzweifeln. Ich habe mir die dump file mal angeschaut und auch schon gegoogelt aber bezieht sich leider alles nur auf xp und hilft mir daher nicht weiter...

Zu meinem System:
Intel i7
DDR3 Ram Nanya 1333MHZ
ATI HD 4870

In der Dump file steht problem caused by hardware, leider kann ich damit nicht viel anfangen vllt. könnt Ihr mehr herauslesen. Ich bin über jede Hilfe sehr dankbar. Danke schonmal im Voraus


Jetzt die dmp. file:



Microsoft (R) Windows Debugger Version 6.11.0001.402 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\Mini030109-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
************************************************** **************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
************************************************** **************************
Executable search path is:
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0xfffff800`01e4e000 PsLoadedModuleList = 0xfffff800`02013db0
Debug session time: Sun Mar 1 13:21:37.144 2009 (GMT+1)
System Uptime: 0 days 1:31:08.101
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
.................................................. .............
.................................................. ..............
.............................
Loading User Symbols
Loading unloaded module list
...................
*** WARNING: Unable to verify timestamp for hal.dll
*** ERROR: Module load completed but symbols could not be loaded for hal.dll
************************************************** *****************************
* *
* Bugcheck Analysis *
* *
************************************************** *****************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa8008932030, be000000, 800400}

***** Kernel symbols are WRONG. Please fix symbols to do analysis.

************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER ***
*** ***
************************************************** ***********************
Unable to load image \SystemRoot\system32\PSHED.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for PSHED.dll
*** ERROR: Module load completed but symbols could not be loaded for PSHED.dll
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_SECTION_DESCRIPTOR ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** ***********************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
************************************************** ***********************
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
************************************************** *******************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
************************************************** *******************
Probably caused by : hardware

Followup: MachineOwner
---------
11
Antworten
7048
Aufrufe
NEU: ATI Catalyst 9.2
Begonnen von OCtopus
21. Februar 2009, 10:21:57
Es gibt schon wieder neue ATI-Treiber. ATI Catalyst 9.2 und Display-Treiber 9.2, diesmal auch in Deutsch:
http://www.amd.com/de-de

Einen neuen Skin für den CCC hat man sich offenbar auch einfallen lassen, die hübsche Atimaus:
0
Antworten
10157
Aufrufe
Firewall block Zugriff auf Port 80
Begonnen von freq.9
19. November 2008, 20:30:29
Ich habe das Problem, dass die Standard-Firewall von Vista den Zugriff auf Port 80 (HTTP) blockt. Es wird nicht nur der Zugriff von aussen (Intranet und Internet) sondern auch der Zugriff über den selben PC geblockt. Ich kann also meinen Apache Webserver nicht erreichen, solange die Firewall aktiv ist. Ich möchte sie nicht deaktivieren, also habe ich den Port 80 zu den Ausnahmen der Firewall hinzugefügt, da ich keinen passenden Eintrag gefunden habe. Der Zugriff wird aber weiterhin geblockt.

Wie muss ich die Firewall nun einstellen, dass der Zugriff auf Port 80 funktioniert. Am besten auch so, dass er von aussen funktioniert. Gibt es vielleicht sogar eine Einstellung, dass mir angezeigt wird, welche Zugriff aktuell geblockt werden?
0
Antworten
94311
Aufrufe
Vista Recovery-CD
Begonnen von netzmonster
24. Oktober 2008, 21:59:58
Wenn das geliebte Vistasystem nicht mehr ganz rundläuft, kann man es mit der Installations-DVD wieder reparieren.
Einige Anbieter von Komplett-PC's oder Notebook's liefern jedoch keine Installations- bzw. Recovery DVD mit.
Deshalb bieten wir Ihnen hier eine Recovery CD an, mit der Sie die Systemwiederherstellung starten können.
[center]

[b][color=red]
[iurl=http://downloads.go-windows.de/vista/Systemtools/RecoveryCD/vista_recover_x86.iso]Recovery-CD-32bit - Download (ca. 150MB)[/iurl]
[iurl=http://downloads.go-windows.de/vista/Systemtools/RecoveryCD/vista_recover_x64.iso]Recovery-CD-64bit - Download (ca. 165MB)[/iurl][/color][/b][/center]

[center]
[img]http://downloads.go-windows.de/vista/Systemtools/RecoveryCD/screenshot.png[/img][/center]


Hinweis :
Bei der .ISO Datei handelt es sich um ein Image, welches mit einem Brennprogramm (z.Bsp. NERO oder CDBurnerXP) als CD gebrannt werden muss.
Mit den oben angebotenen Images kann man Windows Vista [color=red]nicht[/color] neu installieren!

17
Antworten
26812
Aufrufe
Hilfe, Windows Passwort vergessen
Begonnen von schmidti88
24. April 2008, 20:44:53
« 1 2
Hallo!
Mein Bruder hat bei seinem Vista Rechner sein Passwort seines einzigen Accounts vergessen!
Was kann man jetzt machen, ohne Vista neu zu installieren?

Danke für eure Hilfe!

Gruß
0
Antworten
34154
Aufrufe
UAC (Benutzerkontensterung) für bestimmte Anwendungen umgehen
Begonnen von netzmonster
05. März 2008, 16:00:50
Voraussetzung : Windows Vista mit Administratorkonto

Man benötigt das Application Compatibility Toolkit. (Download [url=http://www.microsoft.com/downloads/details.aspx?FamilyID=24da89e9-b581-47b0-b45e-492dd6da2971&displaylang=en]HIER[/url] )

1. ACT downloaden und installieren.
2. Start -> Programme -> Microsoft Application Compatibility Toolkit -> Compatibility Administrator mit der Rechen Maustaste und [i]Als Administrator[/i] starten
3. UAC Warndialog bestätigen
4. Rechte Maustaste auf [i]New Database (1) [Untitled_1][/i] und [i]Create New, Application Fix[/i] wählen
5. Programmnamen im Feld [i]Name of the program to be fixed[/i] eintragen und dann auf [i]Browse[/i] klicken, um das Programm auszuwählen
6. Auf [i]Weiter[/i] klicken und die Optione [i]None[/i] aktivieren und dann wieder auf [i]Weiter[/i].
7. In der Liste [i]Compatibility Fixes[/i] die Klickbox neben [i]RunAsInvoker[/i] aktieren, um die Standardrechte des Tools zu erhöhen. Dann nochmal auf [i]Weiter[/i] und [i]Fertig[/i].
8. Nun muss die neue Datenbank noch gespeichert werden. Dafür muss man auf [i]File, Save As[/i] und einen Namen vergeben (z.Bsp. UACListe im Verzeichnis C:\Windows\ ).
9. Weiter Anwendungen kann man durch das Aufrufen der gespeicherten Datenbank und wiederholen der vorher genannten Schritte zufügen.
10. Die Datenbank wird wie folgt installiert : [i]Start -> Ausführen[/i] und [i]cmd[/i] eingeben. Im Fenster dann [i]sdbinst C:\Windows\UACListe.sdb[/i]

Wenn nun ein freigegebenes Programm aufgerufen wird, startet dieses ohne Nachfrage, auch bei Konten mit eingeschränktem Zugriff.