Antworten / Aufrufe | Themen mit dem Stichwort integrieren | |
---|---|---|
2 Antworten 24583 Aufrufe |
Besitzerrechte über störrrische Dateien/Ordner erwerben | |
3 Antworten 16224 Aufrufe |
Raid-Installation Begonnen von Kalli
21. Mai 2009, 19:17:10 Hallo, ich wolle Windows 7 auf meinen PC installieren, aber der PC bootet nicht von der DVD. Es sind zwei Festplatten eingebaut, die an einem Raid-Controller stecken. Bei der Suche mit google habe ich erfahren, dass man erst die Raid-Treiber auf einen Diskette kopieren muss und damit booten kann. Alledings habe ich gar kein Laufwerk A. Gibt es eine andere Möglichkeit oder kann man das Setup von Windows 7 auch von Vista aus verwenden? Kalli | |
0 Antworten 6179 Aufrufe |
Fritz!Box 7270 Firmware-Version 54.04.74 Release Candidate Begonnen von Markus
18. Mai 2009, 15:34:11 AVM hat für die Fritz!Box 7270 die 54.04.74-14331; dabei handelt es sich um einen Release Candidate (Vorschau auf die nächste offizielle Version), die sich noch im Beta-Stadium befindet: Hier die Neuerungen und Verbesserungen: [quote] * System: Sicherheit der Benutzeroberfläche verbessert (Session-Kontrolle, Abmelde-Funktion) * Speicher (NAS): FRITZ!Mediaserver: neben Musik auch Videos und Bilder für UPnP AV-Geräte * Speicher (NAS): FRITZ!Mediaserver: Interoperabilität zu UPnP-AV-Clients verbessert. * Speicher (NAS): Online-Speicher wie lokale Festplatte nutzen (WebDAV) * Telefonie: Faxempfang je nach Faxnummer auf verschiedene Mailadressen verteilen * Telefonie: Anonyme Anrufer abhängig von der angerufenen Nummer umleiten * WLAN: Autokanal nutzt Informationen zu gefundenen Störquellen zur Kanalauswahl * WLAN: WLAN-fremde Störquellen werden jetzt auch im 5-GHz-Frequenzband gefunden und im WLAN-Monitor angezeigt * WLAN: "Green AP": FRITZ!Box reduziert Stromverbrauch, wenn kein WLAN-Gerät mehr verbunden ist * WLAN: Die WLAN-Sendeleistung wird jetzt für jedes WLAN-Gerät individuell geregelt (TPC) * WLAN: aktualisierte Grafiken zur Anzeige von Störquellen im WLAN-Monitor inklusive Tool-Tipp * WLAN: verbesserte Durchsätze bei WDS-Verbindungen * WLAN: DHCP-Adressvergabe/Timeouts bei WDS-Repeatern gefixt * WLAN: Intel Centrino-Klienten im Stromsparmodus halten jetzt die WLAN-Verbindung * WLAN: Diverse Kompatibilitätsfixes für WPS integriert * WLAN: FRITZ! Mini Verbesserungen bei Stabilität. Mehr Information unter http://www.fritzmini.de * Internet: Priorisierung: Bitratenanzeige eingeführt * Internet: Freigaben auch für UMTS * DECT: FRITZ!Fon MT-D: RSS-Feeds immer aktuell lesen. * DECT: FRITZ!Fon MT-D: Verbesserte Unterstützung mehrerer Anrufbeantworter * DECT: FRITZ!Fon MT-D: Menüsteuerung deutlich beschleunigt * DECT: FRITZ!Fon MT-D Telefonbucheinträge am Mobilteil erstellen * DECT: verbesserte Aktualisierung des Anrufbeantworter-Nachrichtenstatus für diverse DECT-Handgeräte [/quote] Der Download findet sich unter: http://www.avm.de/de/Service/Service-Portale/Service-Portal/Labor/7270_release_candidate/labor_start_release_candidate.php | |
0 Antworten 49875 Aufrufe |
AVM FRITZ!WLAN USB Stick N / N 2.4 Treiber für Windows 7 Begonnen von Markus
11. Mai 2009, 20:38:17 Heute hat AVM für die Fritz!WLAN USB Sticks (inkl. N und N 2.4) aktualisierte Treiber veröffentlicht. Diese haben nun WiFi-Protected Setup integriert (PBC/PIN) und bieten eine automatische Auswahl des stärksten Access Points im WDS-/Repeater-Netzwerk. Erstmals unterstützen diese Treiber auch Windows 7. 32bit-Version: http://download.avm.de/cardware/fritzwlanusb.stick/windows.vista/deutsch/ 64bit-Version: http://download.avm.de/cardware/fritzwlanusb.stick/windows_vista_64bit/deutsch/ Anmerkung: Beim AVM FRITZ!WLAN USB Stick N 2.4 muss es sich wohl um eine neue Hardware-Version des Fritz!Wlan N-Sticks handeln - weitere Details sind mir dazu allerdings nicht bekannt. | |
5 Antworten 4324 Aufrufe |
Office 2007 Service Pack 2 Begonnen von ossinator
28. April 2009, 18:24:53 Die wichtigste Neuerung ist die Unterstützung des OpenDocument Formats. Das Add-On zum Exportieren von Dokumenten im PDF- und XPS-Format muss nicht mehr separat heruntergeladen und installiert werden, sondern wurde in Office 2007 integriert. [b]Word[/b] [list] [li]Export in das PDF- und XPS-Format verbessert (im Vergleich zum Add-On)[/li] [/list] [b]Excel[/b] [list] [li]Erstellen von Diagrammen verbessert (u.a. Performance)[/li] [li]Chart object model wurde in Word und Excel hinzugefügt[/li] [li]Drucken von grafischen Inhalten verbessert[/li] [/list] [b]Outlook[/b] [list] [li]Umfangreiche Performance-Verbesserungen (Starten, Schließen, Darstellung von Mails, Wechsel zwischen den Ordnern)[/li] [li]Verbesserte Zuverlässigkeit der Kalender-Updates, der Suche und des RSS-Readers[/li] [li]Verbesserung des Object Models[/li] [/list] [b]PowerPoint[/b] [list] [li]Erneutes Speichern von Dateien beschleunigt[/li] [li]Diverse Probleme beim Drucken behoben[/li] [/list] [b]Access[/b] [list] [li]Reports können nach Excel exportiert werden[/li] [li]Fehler im Zusammenhang mit dem Import-Assistenten, mit dem Drucken von Reports, mit Makros, mit der Excel-Integration sowie den date filters wurden behoben[/li] [/list] [b]Groove[/b] [list] [li]Verbesserte Form-Tools[/li] [li]Zuverlässigkeit beim Synchronisieren verbessert[/li] [/list] [b]InfoPath[/b] [list] [li]Verbesserte Kompatibilität zwischen den Formularen von InfoPath und anderen Microsoft-Produkten[/li] [/list] [b]OneNote[/b] [list] [li]Synchronisation mit SharePoint verbessert: die Auslastung des SharePoint-Servers konnte reduziert werden und es treten weniger Fehler auf[/li] [/list] [b]Project[/b] [list] [li]Verbesserungen in den Bereichen Scheduling Engine, Active Cache und Gantt-Diagramme[/li] [li]Bessere Unterstützung von älteren Dateien im *.mpp-Format[/li] [/list] [b]Publisher[/b] [list] [li]Behebung diverser Fehler: Druckvorschau, Kompatibilität mit dem Internet Explorer 8, E-Mails unter Windows Vista, Speichern in die Content Library[/li] [/list] [b]Visio[/b] [list] [li]Verbesserte Kompatibilität mit anderen Microsoft-Produkten, beispielsweise beim Einbetten von Visio-Zeichnungen in in PowerPoint, Word, Excel und Co.[/li] [/list] [url=http://download.microsoft.com/download/A/D/0/AD011548-4ACB-4A5A-84CD-CF8F4AC6AF4C/office2007sp2-kb953195-fullfile-de-de.exe][b][color=blue]Microsoft Office SP2[/color][/b][/url] | |
13 Antworten 21190 Aufrufe |
Acronis True image 11 bootet nicht Begonnen von Senfsaft
23. April 2009, 14:00:52 Hallo, ich bin neu hier, also erst mal ein hallo an alle hier. ich hab auch gleich schon ein problem, bei dem ihr mir vll helfen könnt. ich habe mir einen neues acer notebook gekauft das aspire 6935g das billige ding was es bei media markt gab. So nun möchte ich meine Systempartition sichern. Ich hab mir gedacht ich benutze dazu acronis 11, hat bisher immer geklappt. Also cd eingelegt, neu gestartet. Es kam der acronis loader und dann die fehlermeldung couldn´t find system partition oder so in der art. Jetzt meine Frage, wieso das??? muss ich das erst installieren?? dann ne not cd erstellen??? bisher gings immer damit. Einlegen, neu booten, auswählen was gesichert werden soll und dann rauf damit auf die externe platte ich hab keine ahnung ob vista den mbr anders verwaltet oder weiß der geier, wahrscheinlich existiert noch nen versteckte partition mit recovery daten von acer liegts vll daran??? vielen dank für eure hilfe | |
65 Antworten 23799 Aufrufe |
ich möchte vista in XP umwandeln aber hab ein PROBLEM !!! Begonnen von BR34KDOWN
« 1 2 3 4 5 13. April 2009, 15:49:17 Ich habe mir ein acer laptop gekauft wo schon vista draufinstalliert war. Nur ich habe ein Problem es gab keine Vista CD dabei und ich möchte halt Vista in Xp umwandeln. Habe 3 Festplatten Vista ist auf C:/ und ich möchte Xp jetzt auf D:/ machen aber Wie ??? ich möchte Vista Komplett Löschen und Nur mit XP arbeiten ... Mfg [b]BR34KDOWN[/b] ?( | |
6 Antworten 18713 Aufrufe |
Vista PE-LiveCD Begonnen von OCtopus
06. März 2009, 07:03:36 Der neuen ComputerBild 6/2009 liegt eine "Vista Live-CD" bei, und zwar handelt es sich um eine PE-Version, ein voll funktionsfähiges, aber abgespecktes, Vista-Betriebssystem http://de.wikipedia.org/wiki/Microsoft_Windows_PE. Eine solche VistaPE-CD kann man sich zwar auch selber basteln http://technet.microsoft.com/de-de/library/cc507857.aspx Nur klingt das alles ganz schön mühsam. Die "Vista Live-CD" von ComputerBild kann man von CD booten. Vista lädt sich vollständig in den Speicher. Man kann also die CD wechseln. Es sind einige Tools wie HDClone, ein FileRecovery-Tool, ein Partitionierer, NotePad, OpenOffice und Firefox drauf. NTFS-Zugriff ist möglich. Man kann also vollständig auf seine Festplatten zugreifen. Internet via LAN soll funktionieren. An sich also eine wunderschöne Sache. Ich wollte es natürlich auch gleich ausprobieren, aber: Meine USB-Maus samt USB-Tastatur funktionieren nicht! Da sitze ich also vor einem wunderschönen Desktop und kann weder so noch so darauf zugreifen. Im CB-Forum heißt es , daß auch der Zugriff auf USB-Festplatten teilw. nicht funktionieren soll. Andere User berichten allerdings, daß ihre USB-Geräte funktionieren. http://forum.computerbild.de/computer-bild-heft-cd-dvd/computer-bild-vista-pe-6-2009-internet_38240.html Schade, schade. Wäre so schön gewesen. Hat jemand von Euch eine Lösung? Wie kann man da passende Treiber einbinden? http://www.computerbild.de/artikel/cb-Heft-Aktuelle-Ausgabe-902944.html | |
96 Antworten 25381 Aufrufe |
Vista SP2 Begonnen von Specialforces
« 1 2 ... 6 7 » 04. März 2009, 18:05:31 Also ich habe gerade das SP2 von Windows Vista installiert und hoffe, dass das kein zu großer Fehler war. Ersteinmal nervt es mich, dass jetzt immer unten rechts in der Ecke "Windows Vista (TM) Evaluierungskopie Build 6002" steht. Zudem erkennt der mein Virenpogramm nicht mehr. Habe Avira. Jetzt ist da immer in der Symblolleiste dieses rote Schild mit dem weißen Kreuz, obwohl Avira eingeschaltet ist. GIbt es sonst noch Änderungen? PLS Help ME! MFG Specialforces | |
9 Antworten 6960 Aufrufe |
Windows Vista SP2 RC für alle Begonnen von ossinator
04. März 2009, 14:19:33 Microsoft stellt ab sofort den Release Candidate des Windows Vista Service Pack 2 zum öffentlichen Download zur Verfügung. Die offiziellen Download-Seiten von Microsoft wurden noch nicht aktualisiert. Das Service Pack 2 wird sowohl für Windows Vista als auch für den Windows Server 2008 angeboten. Die ebenfalls angebotene ISO-Datei enthalt alle Ausgaben des Service Packs. Der Release Candidate des Windows Vista Service Pack 2 trägt den Buildstring 6002.16670.090130-1715. [b]Windows Vista Service Pack 2:[/b] [list] [li]Unterstützung von Bluetooth 2.1[/li] [li]Möglichkeit zum Beschreiben von Blu-ray-Medien[/li] [li]Integration von Windows Connect Now[/li] [li]exFAT Dateisystem unterstützt UTC-Zeitstempel[/li] [li]Unterstützung für 64-Bit-Prozessoren von VIA[/li] [li]Verbesserte Anwendungskompatibilität[/li] [li]Patch gegen WLAN-Probleme nach Standby[/li] [li]Integration der Windows Search 4.0[/li] [li]Verbessertes RSS-Gadget[/li] [li]Überarbeiteter Code für weniger Abstürze[/li] [li]Service Pack Clean up tool[/li] [li]Verständlichere / nützlichere Fehlermeldungen[/li] [/list] [url=http://download.microsoft.com/download/8/2/4/824FA375-0B50-48B3-B685-ADD0F5D48C70/Windows6.0-KB948465-X86.exe][b][color=blue]Windows Vista Service Pack 2 RC (32-Bit)[/color][/b][/url] [url=http://download.microsoft.com/download/A/B/8/AB83BD9C-7CB1-4215-ACFA-589C92D88B01/Windows6.0-KB948465-X64.exe][b][color=blue]Windows Vista Service Pack 2 RC (64-Bit)[/color][/b][/url] [url=http://download.microsoft.com/download/C/3/1/C3158CBC-E951-48CC-B926-978905CE4F7D/6002.16670.090130-1715_iso_update_sp_wave0-RCSP2.0_DVD.iso][b][color=blue]Windows Vista Service Pack 2 RC (ISO)[/color][/b][/url] | |
14 Antworten 8095 Aufrufe |
Vista x64 Problem :( Begonnen von zweipackk
01. März 2009, 17:29:48 Hallöchen Habe folgendes Problem mein OS Vista x64 stürzt öfters unerwartet ab, dabei ist es egal welche Anwendungen laufen oder nicht ist also kein Softwareproblem. Ich habe auch Prime95 24h laufen lassen können und es gab absolut keine Probleme oder Bluescreens. Auch Memtest86 fand keine Fehler. Ich bin wirklich am verzweifeln. Ich habe mir die dump file mal angeschaut und auch schon gegoogelt aber bezieht sich leider alles nur auf xp und hilft mir daher nicht weiter... Zu meinem System: Intel i7 DDR3 Ram Nanya 1333MHZ ATI HD 4870 In der Dump file steht problem caused by hardware, leider kann ich damit nicht viel anfangen vllt. könnt Ihr mehr herauslesen. Ich bin über jede Hilfe sehr dankbar. Danke schonmal im Voraus Jetzt die dmp. file: Microsoft (R) Windows Debugger Version 6.11.0001.402 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\Mini030109-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: *** Invalid *** ************************************************** ************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * ************************************************** ************************** Executable search path is: ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Machine Name: Kernel base = 0xfffff800`01e4e000 PsLoadedModuleList = 0xfffff800`02013db0 Debug session time: Sun Mar 1 13:21:37.144 2009 (GMT+1) System Uptime: 0 days 1:31:08.101 ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols .................................................. ............. .................................................. .............. ............................. Loading User Symbols Loading unloaded module list ................... *** WARNING: Unable to verify timestamp for hal.dll *** ERROR: Module load completed but symbols could not be loaded for hal.dll ************************************************** ***************************** * * * Bugcheck Analysis * * * ************************************************** ***************************** Use !analyze -v to get detailed debugging information. BugCheck 124, {0, fffffa8008932030, be000000, 800400} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** Unable to load image \SystemRoot\system32\PSHED.dll, Win32 error 0n2 *** WARNING: Unable to verify timestamp for PSHED.dll *** ERROR: Module load completed but symbols could not be loaded for PSHED.dll ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_SECTION_DESCRIPTOR *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* Probably caused by : hardware Followup: MachineOwner --------- | |
1 Antworten 8275 Aufrufe |
Windows Live Toolbar für Firefox? Begonnen von kool
27. Februar 2009, 14:02:05 Hi, gibt es die Windows Live Toolbar auch für Firefox, oder kennt jemand eine Alternative? MfG | |
6 Antworten 5654 Aufrufe |
Windows Live Mail-CPU Volllast Begonnen von f.walter
21. Februar 2009, 19:10:08 Hallo Leute!Mein erster Einstieg natürlich wegen eines Proplems! Habe am Laptop Windows Live Mail laufen,bin damit auch zufrieden. Nur wenn er die Nachrichten abgefragt hat aktualisiert er den Kalender- CPU ca.2 Minuten auf Volllast ,dann Fehlermeldung: Kalender konnte nicht aktualisiert werden. ????? Live Mail Version 2009-wer kann mir helfen? | |
5 Antworten 16960 Aufrufe |
AVM Fritz!Box Firmware x.70 Preview mit SIP-Server für Fritz Box 7170 und 7270 Begonnen von Markus
06. Februar 2009, 22:24:23 In der aktuellsten Beta-Version der Fritz!Box-Firmware hat AVM erstmals einen SIP-Server (SIP-Registrar) integriert. Damit ist es möglich auch VOIP-Telefone anderer Marken als von AVM an der Fritz!Box zu betreiben. Die Voip-Telefone können dabei über LAN oder auch WLAN mit der Fritz!Box verbunden werden. Funktionsweise: Die Fritz!Box stellt einen VOIP-Server bereit, mit dem man das Telefon mittels Nummer (=Benutzername) und Passwort an der Fritz!Box anmelden kann; ist das VOIP-Telefon erfolgreich an der Fritz!Box angemeldet kann man in der Fritz!Box die Telefonnummern einstellen, auf die das VOIPT-Telefon reagieren soll. Die Firmware für die Fritz-Box 7270 bietet zudem noch folgende Neuerungen: [list] [li]Telefonie: verbesserte Freisprechfunktion für FRITZ!Fon MT-D[/li] [li]Telefonie: Übernahme einer Rufnummer aus der Anrufliste des FRITZ!Fon MT-Ds ins FRITZ!Box-Telefonbuch[/li] [li]Telefonie: Stabilität verbessert[/li] [li]Telefonie: irreführende Fehlermeldung trotz erfolgreichem Faxempfang beseitigt[/li] [li]FRITZ!Musikbox: Interoperabilität mit SONY TVs (Z-Serie) verbessert[/li] [li]System: Textüberarbeitungen in der Benutzeroberfläche[/li] [/list] Die Firmware-Vorschau auf die nächste offizielle Firmware ist für die Fritz!Box Fon Wlan 7170 und 7270 verfügbar: http://www.avm.de/de/Service/Service-Portale/Service-Portal/Labor/labor.php | |
7 Antworten 27438 Aufrufe |
Recovery Partition selbst erstellen? Begonnen von Lord_Zuribu
05. Februar 2009, 16:50:06 Hallo zusammen Hab mal eine Frage. Seit einiger Zeit liefert HP bei Notebooks ja keine Recovery DVD mehr aus, sondern nur noch eine Recovery Partition. Dort erscheint ja dann beim booten "Press F11 for Recovery" Wenn dann nichts unternommen wird, bootet das System normal. Die Frage ist nun, kann ich das auch auf meinem Desktop-Rechner machen. Eine Partiotion mit einem Backup zu erstellen ist ja nicht das Problem. Aber das dann beim booten auch die Meldung kommt ist knifflig. Ist das nur bie HP so, oder haben die modifizierte BIOS' oder kann ich das ganz normal einstellen? Danke euch schon mal Gruss Lord_Zuribu | |
1 Antworten 6592 Aufrufe |
Windows Installer 4.5 kommt mit dem Vista SP2 Begonnen von ossinator
30. Januar 2009, 12:12:38 Die aktuelle Version 4.5 des Windows Installer wird mit dem Windows Vista Service Pack 2 ausgeliefert. Die Fassung steht schon seit Juni 2008 über das Download Center zur Verfügung, wurde aber bisher noch nicht in die offiziellen Update-Pakete eingebunden. Durch die Integration in das Service Pack 2 soll die Version 4.5 deutlich größere Verbreitung finden. Windows Installer 4.5 wird für die Installation von Software unter den verschiedenen Varianten des Betriebssystems benötigt. Mit Version 4.5 hält unter anderem eine Verbesserung des Komforts Einzug. So kann nun sichergestellt werden, dass eine Installation einwandfrei verläuft, in dem der Setup-Prozess zu einem beliebigen Zeitpunkt unterbrochen und nach einem Neustart des Betriebssystems an dieser Stelle fortgesetzt werden kann. Außerdem können mit einem Installer nun gleich mehrere Pakete eingespielt werden. Gegebenenfalls kann immer auch ein "Rollback" erfolgen, bei dem nach Fehlern ein erneuter Installationsversuch gestartet wird, ohne dabei zwingend auf Backups zugreifen zu müssen. Die wohl wichtigste Neuerung ist jedoch die Option, künftig nach eigenem Gutdünken gestaltete Installationsprogramme einzusetzen. Bisher konnte Setups, die den Windows Installer nutzten, nur mit viel Aufwand und in stark beschränktem Maße individualisiert gestaltet werden. Jetzt sollen Entwickler die Benutzeroberfläche ganz nach ihren Bedürfnissen anpassen können, ohne dabei fehlerbehaftete Workarounds oder ähnliches nutzen zu müssen. [url=http://www.microsoft.com/downloads/details.aspx?displaylang=de&FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4][b][color=blue]Windows Installer 4.5[/color][/b][/url] | |
6 Antworten 10040 Aufrufe |
Vorstellung der AVM FRITZ!Box Fon WLAN 7390 auf der CeBIT Begonnen von Markus
21. Januar 2009, 17:19:59 Auf der Cebit 2009 wird AVM die neue FRITZ!Box Fon WLAN 7390 vorstellen. Damit setzt das Berliner Unternehmen AVM erneut neue Maßstäbe am Internetanschluss und bei der Vernetzung zuhause. Die neue FRITZ!Box Fon WLAN 7390 erweitert die erfolgreiche FRITZ!Box-Linie und ist erstmals auf dem AVM-Messestand in Halle 13, C48 im Einsatz. [b]Technische Daten der AVM Fritz!Box Fon WLAN 7390[/b] [list][li]WLAN-N-Router[/li] [li]VDSL- und ADSL-Fähigkeit[/li] [li]integrierte DECT-Basisstation[/li] [li]Gigabit Ethernet[/li] [li]2 GB internem Netzwerkspeicher inklusive NAS-Funktion[/li] [/list] Die Fritz-Box 7390 enstrpicht somit abgesehen vom Gigabit-Netzwerk und dem 2GB Speicher mit NAS-Funktion in etwa der AVM Fritz!Box 7270. AVM hatte erst vor einigen Tagen die "FRITZ!Box Fon WLAN 7570 VDSL" angekündigt, die über Internet-Provider vetrieben werden soll; anzunehmen ist, dass es sich um die gleiche Box handelt und AVM wohl kurzfristig die Typen-Bezeichnung geändert hat. So sieht die neue Fritz-Box 7390 aus (die Antennen sind nun im Gerät integriert - hoffentlich führt das zu keiner Veschlächterung des WLAN-Empfangs...) [url=http://www.avm.de/de/Presse/Pressefotos/Fotos/AVM_FRITZBox_Fon_WLAN_7390_Vorbericht.jpg][img]http://www.avm.de/de/Presse/Pressefotos/Thumbnails/AVM_FRITZBox_Fon_WLAN_7390_Vorbericht_tn.jpg[/img][/url] Quelle:avm.de | |
8 Antworten 41606 Aufrufe |
Für Nero 8 gibt es ein neues Update 8.3.13.0 Begonnen von OCtopus
19. Dezember 2008, 15:19:05 Für Nero 8, die bisher letzte sinnvolle Nero-Version, gibt es ein neues Update 8.3.13.0 http://www.nero.com/deu/downloads-nero8-update.php?NeroSID=34dcc44cb74f951388e25cc2b5a0ffd8 Für das neue Nero 9 gibt es auch ein Update 9.2.6.0 http://www.nero.com/deu/downloads-nero9-update.php?NeroSID=34dcc44cb74f951388e25cc2b5a0ffd8 Doch Nero 9 kann man kaum noch als sinnvoll bezeichnen. Nichts Neues dabei, stundenlange Installation, so was von überladen, daß es vor Fett kaum noch gehen kann. Absolut überflüssig und schwerfällig. Wie das alte Rom wird Nero demnächst sang- und klanglos untergehen. Also bleibt getrost bei Nero 8, auch wenn das schon ein paar Kilos zu viel hat. | |
6 Antworten 9288 Aufrufe |
Drucker in das Netzwerk einbinden Begonnen von Fluka
06. Dezember 2008, 23:39:55 [color=blue]Hallo an Alle, Ein paar Fakten vorab: LAM200R (4 Port Router) Brother MFC-5860CN System -> XP Ich möchte das Multifunktionsgerät in das Netzwerk einbinden, leider klappt das nicht wirklich. Er kopiert und empfängt/verschickt Faxe, schonmal, aber das ist auch keine Kunst. Jetzt muss der Rest noch erfolgen nämlich scannen und drucken! Kann mir da einer bitte helfen?[/color] | |
0 Antworten 11197 Aufrufe |
Im Bootmanager Standardbetriebssystem auswählen Begonnen von ossinator
01. Dezember 2008, 07:37:58 Natürlich wissen die Cracks unter euch, wie man beim Start und Verwendung des Bootmanagers bei mehreren Betriebssystemen das gewünschte Standardbetriebssystem vorauswählt, um einen manuellen Wechsel (Cursor hoch/runter) zu vermeiden. Dazu mit [i][color=green]Win+R[/color][/i] die Systemkonfiguration aufrufen und den Reiter [color=green][i]Start[/i][/color] Auswählen. Dort unter den angezeigten Betriebssystemen das gewünschte Anklicken und auf [color=green][i]Standard[/i][/color] setzen. Nach einem Neustart ist im Bootmanager das zuvor ausgewählte Betriebssystem unterlegt und wird nach ablauf der eingestellten Zeit gestartet. |
http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-system-file-in-windows-vista/
Hier gibt es aber eine Möglichkeit, dieses Tool ganz einfach in den Rechtsklick einzubinden:
http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/
Nach Anwendung der Datei "InstallTakeOwnership.reg" ist das alles im Rechtsklick integriert und man wird endlich wirklich Herr über seine Dateien und Ordner. Wenn es nicht sofort funktioniert hat muß man ggf. noch die Berechtigungen der Datei auf "Vollzugriff" setzen.
Möglicherweise ist ein Neustart nach der Installation dieses Registry-Hacks nötig.