Antworten / Aufrufe | Themen mit dem Stichwort system32 | |
---|---|---|
1 Antworten 3121 Aufrufe | ||
20 Antworten 6916 Aufrufe |
Hilfeee Begonnen von Chiara
« 1 2 07. Juli 2009, 08:25:36 Hallo ihr lieben, in einem anderen Board habe ich auch schon nach Hilfe gesucht aber man konnte mir leider nicht bei der Lösung helfen. Ich hoffe das mir hier jemand helfen kann. Also ich habe mir ca. vor zwei Wochen einen Laptop von Acer bei Media Markt gekauft mit dem Betriebssystem VISTA. (Kurze Infos zum PC: ACER ASPIRE 7735ZG, Intel Pentium duo Core, 4GB Arbeitsspeicher, und 320GB Festplatte) Folgenden Fehler habe ich direkt gehabt: ich wollte mal in die Systemsteuerung rein. Doch der lässt mich nicht: Ich klicke... dann öffnet sich das Fenster für die Systemsteuerung und dann kommt die Meldung: Windows Explorer funktioniert nicht mehr und ein paar sekunden später geht ein weiteres fenster auf in dem steht dann: Windows Explorer wird neu gestartet und dann schliesst er das ganze. Dann hat man mir geraten mal im Ereignisprotokoll zu schauen welcher Fehler wirklich vorliegt. Der Fehler hieß dann (ID:1000): Fehlerhafte Anwendung Explorer.EXE, Version 6.0.6001.18164, Zeitstempel 0x4907e242, fehlerhaftes Modul ntdll.dll, Version 6.0.6001.18000, Zeitstempel 0x4791a7a6, Ausnahmecode 0xc0000374, Fehleroffset 0x000b015d, Prozess-ID 0xcf0, Anwendungsstartzeit 01c9fd6cbcd87c9b. Mir wurde dann erst einmal geraten das Service Pack2 zu installieren um zu schauen ob die fehlende Datei dann wieder vorhanden ist. Doch obwohl ich dieses dann gemacht habe, ist der Fehler weiterhin im Ereignisprotokoll vorhanden. Ich hoffe, das noch jemand einen Rat für mich hat. Vielleicht kann man die Datei ja auch irgendwie downloaden und die dann wieder dort hin packen, wo sie hingehört | |
11 Antworten 18926 Aufrufe |
Sie benötigen Berechtigungen zur Durchführung des Vorgangs"... Begonnen von Pandora
04. Juli 2009, 12:09:46 Hallo! Habe das gleiche Problem wie hundert andere auch... Vista lässt mich nicht machen was ICH mit MEINEM Pc machen will! Kurz: Ich will von MEINEM Handy MEINE Daten auf MEINEN Pc spielen und es kommt die bekannte "[b]Sie benötigen Berechtigungen zur Durchführung des Vorgangs"...[/b] -Meldung. Was ich schon getan habe: Ich bin der Admin, habe die Benutzerkonteneinstellung ausgeschaltet, habe auch schonmal alle AntiIrgendwas-Programme ausgeschaltet, habe das Unlocker-Programm geladen und ausprobiert, habe direkt bei der Datei unter Eigenschaften alles zugelassen was man kann und es funktioniert trotzdem nicht. So... kann mir irgendjemand helfen... und wenn nicht.... kann ich umsonst mein Vista gegen etwas eintauschen was auch wirklich funktioniert? | |
7 Antworten 9031 Aufrufe |
Rechner fährt nich hoch wg. sfsync04.sys Begonnen von Matze|Auxburg
16. Juni 2009, 20:22:14 Hallo Leute! Vorweg: Ich bin kein Pro. habs auch net mit google lösen können! ;) Also folgendes: Mein Kumpel hat Vista Ultimate 64 drauf. Zuletzt installiert hat er das Game "Rise and Fall" (bei Google finde ich nur, dass es nur auf W2000 un XP läuft!!) Nach dem Neustart hatte er folgendes Problem(siehe beigef. Screen!) Nun soll ich das repa.! -.- Ich hab die Vista DVD eingelegt und wollte von Disc booten. Macht er nicht. er nimmt nichmal meine (USB) Tastatur an, damit ich auswählen kann aus 1.Abgesicherter Modus 2.Zuletzt bekannte Konfig...blah 3.Windoof normal starten Nach 30Sekunden versucht er Windows normal zu starten (ich konnte nichts anderes auswähen und ich habe auch keine PS2-Tastatur!) dann bringt er eben die Meldung, die ihr auf dem Bild seht. Er vermisst ne Treiberdatei namens "sfsync04.sys" im Ordner "...\system32\drivers" Ich hab die Festplatte bei mir angesteckt und siehe da, die Datei ist vorhanden (fehlt der Treiber zur Datei?) das ist zu tiefe Materie für mich! ?( ?( vllt. kann mir jemand helfen, ich hab keinen Bock nach nur drei Monaten den rechner nochmal neu aufzusetzen!! Ehrlich...da is meine Zeit zu schade für die Schweinearbeit, da ich Familie und nen Job habe! :wink btw: gibts ne Seite, wo ich fehlende .dll-Dateien oder so Treibermist runterladen kann?? ich meine nich Chip.de oder son ähnlichen Mist, sondern drauf spezialisierte Seiten. BITTE BITTE ICH BRAUCHE HILFÖÖÖÖÖÖÖÖÖ!!! Fettes Danke im Vorraus!! Matze | |
5 Antworten 15284 Aufrufe |
desktop symbole nach neustart am Rand und Raster ausgerichtet Begonnen von nadarosa
15. Juni 2009, 09:48:19 Hallo, seid neustem sind bei mir nach jedem Start die Desktopsymbole alle am rechten Rand wie am Raster ausgerichtet. Ich ordner sie immer wieder neu an und nach dem Neustart wieder alles Essig. An Raster ausrichten oder automatisch anordnen ist natürlich nicht angehakt. Windows speichert also die Positionen der Symbole nicht. Weiß jemand eine Lösung? Grüße von Andreas Ach ja, ich habe Vista Ultimate 32bit. | |
11 Antworten 6336 Aufrufe |
Systemwiederherstellung Begonnen von gerhart
13. Juni 2009, 08:43:02 Hallo, gestern habe ich auf meinem ASUS Notebook (Windows Vista Ultimate 64) das neue SP2 installiert. Nun habe ich das Problem, dass die Systemwiederherstellung nicht mehr geht. Wenn ich unter "Sichern und Wiederherstellen" den Punkt "Wiederherstellungspunkt erstellen oder Einstellungen ändern" anwähle kommt die im Anhang beschriebene Fehlermeldung. SystemPropertiesProtection.exe - Ungültiges Bild C:\Windows\system32\SRCLIENT.dll ist entweder nicht für die Ausführung unter Windows vorgesehen ... | |
11 Antworten 11797 Aufrufe |
winsxs-Ordner wird immer größer Begonnen von OCtopus
12. Juni 2009, 23:59:29 Leute, sagt mal, ist Euer winsxs-Ordner (unter C:\Windows) auch inzwischen fast 8 GB groß und hat über 43.000 Dateien? Ist das normal? Was speichert denn Windows da alles? | |
7 Antworten 6253 Aufrufe |
Bluescreen bei Vista 32 Begonnen von HILTI
02. Juni 2009, 09:23:34 Habe seit ein paar wochen ab und zu einen Bluesceen nur ich weiß nicht wieso Amd Phenom 9500 Quad Core 2.2 Ram 2GB MSI BOard Gforce 8600 GT Fehler : Problemsignatur: Problemereignisname: BlueScreen Betriebsystemversion: 6.0.6002.2.2.0.256.1 Gebietsschema-ID: 1031 Zusatzinformationen zum Problem: BCCode: 1000007e BCP1: C0000005 BCP2: 20646156 BCP3: 8719BBC0 BCP4: 8719B8BC OS Version: 6_0_6002 Service Pack: 2_0 Product: 256_1 Dateien, die bei der Beschreibung des Problems hilfreich sind: C:\Windows\Minidump\Mini060209-01.dmp C:\Users\Hilbert\AppData\Local\Temp\WER-158781-0.sysdata.xml C:\Users\Hilbert\AppData\Local\Temp\WER7C1.tmp.version.txt VIelleicht weiß einer von euch was er bedeutet. VIelen dank im vorraus ------------- hab die dump datei ausgewertet viuelleicht könnt ihr damit was anfangen. Microsoft (R) Windows Debugger Version 6.11.0001.404 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\Mini060209-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: „SRV*c:\windows\symbols*http://msdl.microsoft.com/download/symbols“ Executable search path is: Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntkrnlpa.exe *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (4 procs) Free x86 compatible Product: WinNt, suite: TerminalServer SingleUserTS Machine Name: Kernel base = 0x81e37000 PsLoadedModuleList = 0x81f4ec70 Debug session time: Mon Jun 1 22:50:53.677 2009 (GMT+2) System Uptime: 0 days 2:18:50.468 Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntkrnlpa.exe *** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe Loading Kernel Symbols ............................................................... ................................................................ ....................... Loading User Symbols Loading unloaded module list .......... Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for nvlddmkm.sys *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 1000007E, {c0000005, 20646156, 8719bbc0, 8719b8bc} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* Probably caused by : nvlddmkm.sys ( nvlddmkm+4b4090 ) Followup: MachineOwner --------- 0: kd> „!analyze -v“ ^ Syntax error in '„!analyze -v“' 0: kd> !analyze -v ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) This is a very common bugcheck. Usually the exception address pinpoints the driver/function that caused the problem. Always note this address as well as the link date of the driver/image that contains this address. Some common problems are exception code 0x80000003. This means a hard coded breakpoint or assertion was hit, but this system was booted /NODEBUG. This is not supposed to happen as developers should never have hardcoded breakpoints in retail code, but ... If this happens, make sure a debugger gets connected, and the system is booted /DEBUG. This will let us see why this breakpoint is happening. Arguments: Arg1: c0000005, The exception code that was not handled Arg2: 20646156, The address that the exception occurred at Arg3: 8719bbc0, Exception Record Address Arg4: 8719b8bc, Context Record Address Debugging Details: ------------------ ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ************************************************************************* *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************************************* ADDITIONAL_DEBUG_TEXT: Use '!findthebuild' command to search for the target build information. If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols. FAULTING_MODULE: 81e37000 nt DEBUG_FLR_IMAGE_TIMESTAMP: 49fa9243 EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - Die Anweisung in 0x%08lx verweist auf Speicher 0x%08lx. Der Vorgang %s konnte nicht im Speicher durchgef hrt werden. FAULTING_IP: +3eefe 20646156 ?? ??? EXCEPTION_RECORD: 8719bbc0 -- (.exr 0xffffffff8719bbc0) ExceptionAddress: 20646156 ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 00000008 Parameter[1]: 20646156 Attempt to execute non-executable address 20646156 CONTEXT: 8719b8bc -- (.cxr 0xffffffff8719b8bc) eax=8719bca4 ebx=93881750 ecx=20646156 edx=8eabe070 esi=00000000 edi=93872ab0 eip=20646156 esp=8719bc88 ebp=8719bca8 iopl=0 nv up ei pl zr na pe nc cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246 20646156 ?? ??? Resetting default scope CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT BUGCHECK_STR: 0x7E CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from 8eabe090 to 20646156 STACK_TEXT: WARNING: Frame IP not in any known module. Following frames may be wrong. 8719bc84 8eabe090 93881750 93872ab0 8719bca4 0x20646156 8719bca8 8e79ca1e 93881750 93872ab0 8719bcd8 nvlddmkm+0x4b4090 8719bd08 8e79d2c0 84de4730 81f3913c 8719bd2c nvlddmkm+0x192a1e 8719bd18 8e704803 00000000 98856b70 85b4ef38 nvlddmkm+0x1932c0 8719bd2c 8204486f 85b4ef38 84de4730 846fd8b0 nvlddmkm+0xfa803 8719bd44 81edce22 846fd8b0 00000000 83993d78 nt+0x20d86f 8719bd7c 8200cc42 846fd8b0 9e36b428 00000000 nt+0xa5e22 8719bdc0 81e75efe 81edcd25 00000001 00000000 nt+0x1d5c42 00000000 00000000 00000000 00000000 00000000 nt+0x3eefe FOLLOWUP_IP: nvlddmkm+4b4090 8eabe090 85c0 test eax,eax SYMBOL_STACK_INDEX: 1 SYMBOL_NAME: nvlddmkm+4b4090 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nvlddmkm IMAGE_NAME: nvlddmkm.sys STACK_COMMAND: .cxr 0xffffffff8719b8bc ; kb BUCKET_ID: WRONG_SYMBOLS Followup: MachineOwner --------- | |
2 Antworten 24569 Aufrufe |
Besitzerrechte über störrrische Dateien/Ordner erwerben Begonnen von OCtopus
01. Juni 2009, 10:31:04 Wem ist es nicht schon passiert, daß eine Datei nicht überschrieben oder ersetzt werden konnte, weil man dafür nicht die nötigen Rechte hatte? Kaum einer weiß, daß Vista ein verstecktes Tool "System32\takeown.exe" anbietet, mit dem man die vollen Besitzerrechte über solch störrische Teile erwerben kann. Eigentlich kann man dieses Tool nur relativ kompliziert über die Befehlszeile ausführen, vgl. http://www.howtogeek.com/howto/windows-vista/how-to-delete-a-system-file-in-windows-vista/ Hier gibt es aber eine Möglichkeit, dieses Tool ganz einfach in den Rechtsklick einzubinden: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/ Nach Anwendung der Datei "InstallTakeOwnership.reg" ist das alles im Rechtsklick integriert und man wird endlich wirklich Herr über seine Dateien und Ordner. Wenn es nicht sofort funktioniert hat muß man ggf. noch die Berechtigungen der Datei auf "Vollzugriff" setzen. Möglicherweise ist ein Neustart nach der Installation dieses Registry-Hacks nötig. | |
17 Antworten 14525 Aufrufe |
vista home premium update funktioniert nicht mehr. Begonnen von montana55
« 1 2 31. Mai 2009, 15:17:39 Hallo! Ich weiss es, dass vielen Leuten so etwas passiert...jetzt hat es auch mich getroffen. Keine Ahnung-warum. Code 80004002,unbekannter Windows Fehler. Ich habe Internet durchgewühlt, zig Tricks und Tipps wahrgenommen, angewendet und ...NIX! Ich habe auch diesen Tool pcwUpdateRepair installiert, weil ich gedacht habe - DAS IST ES! Ist es aber nicht... Nach einigen Sekunden erscheint nämlich so eine Meldung [b]C:\Windows\system32\wups2.dll ist entweder nicht für diese Ausführung unter Windows vorgesehen oder enthält einen Fehler. Installieren sie das Programm mit Originalinstallationsmedien erneut, oder wenden sich an den Systemadministrator oder Softwarelieferanten, um Unterstützung zu erhalten.[/b] Dann läuft das Programm weiter, alles sieht eigentlich normal und vernünftig aus, aber Update bleibt naürlich außer Betrieb. Kann mir jemand sagen, worum es hier geht? Auf jeden Fall habe ich mir diese wup2.dll angeschaut und festgestellt das diese einfach 0 KB groß ist, also die gibt es so gut wie gar nicht. Ich habe mir eine "volle" wups2.dll heruntergeladen und versuchte die "leere" im System32 zu ersetzen aber auch das funktioniert nicht, weil ich angeblich keine Berechtigung dazu habe!!! Ich bin doch Admin und der einziger Benutzer! (Das ist auch die Sache, die mich in Vista auf die Palme bringt!). Ich habe den Eindruck, dass die ganze Geschichte (mit dem Programm, der nicht effiezient ist) sich um diese wups2.dll dreht... Sooo, hätte vielleicht jemad irgendwelche Erklärung dafür? Ich drehe einfach durch und natürlich habe ioch keine Lust auf die Neuinstallation... Wie schalten man eigentlich manuell Automatische Update aus??? Das geht eben auch nicht...hat es etwas mit dem Benutzerkontensteurung zu tun? Ich wäre echt heilfroh, wenn Ihr mir helefen könnten! Danke im Voraus! montana55 | |
12 Antworten 6137 Aufrufe |
Vista SP2 Probleme Begonnen von ypsii
27. Mai 2009, 14:37:47 Mein System Hilfe ! :flagge Bei mir hat sich über Win Update das SP2 installiert, am 16.04 und am 17.04 hat sich das Vorbereitungstool KB947821 auf den Rechner geladen also 2x Seit dem heutigem Update vom SP2 habe ich Probleme, gleich als das Update fertig war bekam ich die Meldung Ordnungszahl 654 DLL "iertutil.dll" ist nicht aufzufinden, mein FF funktioniert zum Glück aber der IE geht nicht auf, also nur kurz und stürzt wieder ab. Dann geht beim Neustart immer ein Fenster von Win auf also nicht der Browser nur oben links ist das IE Zeichen ansonsten einfach weiß nix drin im Fenster(siehe Bild)...das bekomm ich dann nur über den Task zu wobei der Pc dann runter fährt und wieder neu startet, jetz geht das selbe Spiel wieder los. Das nächste wenn ich auf Start und Hilfe Datei gehe bekomm ich keine richtige Anzeige (Bild). Ein Bild vom Task poste ich auch mal. Ich hab inzwischen mal die Vista DVD rein und die Reparatur gestartet - kein Ergebnis, dann Systemwiederherstellung hat auch nicht geändert. Vielleicht kann mir jemand was sagen dazu. Danke So jetzt funktioniert mein Incredi auch nicht mehr und auch meine Gadgets gehn nicht...: Jetz wird es aber lustig hier.. :wallbash Ich bin gespannt ob hier noch mehr die selben Probleme haben. | |
15 Antworten 10378 Aufrufe |
BITTE UM HILFE!!! EXPLORER-PROBLEM / HOSTPROZESS RUNDLL32 FUNKTIONIERT NICHT!!! Begonnen von vista_rookie
« 1 2 06. Mai 2009, 21:23:56 hallo zusammen! habe seit vorgestern ein nerviges problem mit vista. will nunmehr versuchen, eine chronologische historik der ereignisse zu schildern, um eine evtl. fehlersuche zu beschleunigen. neuer laptop, vor ca. 3 wochen gekauft. installiert ist vista home premium. allerdings mit partitionen c: und d: vista ist auf c: vorgestern abend VIRTUAL DUB runtergeladen, da ich sehr viel mit movies/videos arbeite. VD entpackt u. wollte die erste datei cutten, plötzlich kam eine fehlermeldung in VD u. der explorer musste sich neu starten. seitdem besteht das problem, sobald ich auch nur den ornder öffne, wo meine videodateien sind. >>> habe dann nach info eines anderen users folgenden schritt getan: Geh in die Registry: Start-Ausführen >> regedit << ok. Dort suchst du den Eintrag: HKEY LOCAL MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion . Bei Current Version nicht mehr auf das + Zeichen klicken, sondern direkt drauf. Den Eintrag "ProgramFilesDir" ändern auf das Laufwerk D:. Neustart. Fertig.[/b] nun erscheint beim öffnen des ordners folgender hinweis: [b]Fehler beim Laden von D:\Program Files\Movie Maker\wmm2clip.dll Das Angegebene Modul kann nicht gefunden werden[/b] also ist zwar keine direkte hostprozess-fehlermeldung mehr, dennoch existiert das problem anscheinend weiter. Bitte um Hilfe! Würde gerne zunächst die Registry wieder auf C: zurücksetzen, damit der ursprungszustand wieder hergestellt ist u. dann step by step mit der fehlersuche beginnen! Vielleicht kennt sich ja jemnd. gut in vista aus u. kennt ggf. die hier geschilderte problematik!!! DANKE IM VORAUS! MFG S. | |
1 Antworten 7891 Aufrufe |
Das Prefetch lösch System! Begonnen von Coke
09. April 2009, 21:13:30 [b]Prefetch Datein richtig löschen :zwinkern[/b] Windows lädt häufig genutzte Programme bereits beim Systemstart in den Arbeitsspeicher (Prefetch-Funktion). Alle Programme die beim Windows Start gestartet werden, werden hier hinterlegt. Der große Nachteil an der Sache ist: Das sich so ein großer Haufen von Datensammlungen bildet... Darum sollte man hin und wieder sein Prefetch Ordner löschen. Nun biete ich euch zwei Methoden an wie ihr den Ordner leert! [list] [li]1. Methode[/li][/list] [list]Ihr sucht eure Festplatte (C:/) klickt auf Windows und dann auf Prefetch Ordner makieren, leeren, fertig.[/list] [list][li]2. Methode[/li][/list] [list]Ihr öffnet den Editor und schreibt folgendes Rein: [tt] del %windir%\prefetch\*.* /q start %windir%\system32\rundll32.exe advapi32.dll,ProcessIdleTasks[/tt] Eigendlich ein ganz normales Komando. Da wir aber nicht immer das abschreiben wollen, speichern wir das ganze als: „Prefetch Cleaner[b].cmd[/b]“ ab. [i](Die „“ dringend weglassen!)[/i][/list] So könnt ihr immer einmal draufklicken und könnt sicher gehen das alles funktioniert hat :). Finde Methode 2 einfacher :zwinkern [i]Grüße, Mario[/i] | |
14 Antworten 7541 Aufrufe |
Ati neuer Treiber 9.4 Begonnen von ossinator
09. April 2009, 07:29:41 [b]Changelog:[/b] * Unter Windows Vista behobene Probleme: [list] [li]"World of Warcraft" or "World of Warcraft - Wrath of the Lich King": Flickering no longer occurs when Shadow is set to medium/high using CrossFire[/li] [li]Google Sketchup no longer displays blank screen[/li] [li]Resolutions above 10 x 7 will now full screen properly for specific HDMI displays[/li] [li]Artifacts no longer visible while playing Age of Conan DX10[/li] [li]VC-1 progressive disc playback no longer exhibits block corruption[/li] [/list] * Unter Windows XP behobene Probleme: [list] [li]The Compute Abstraction Layer (CAL) driver now functions properly under Windows XP[/li] [li]Overlay Theatre Mode display no longer corrupt after enabling 3D screen saver[/li] [li]OS Display Settings no longer shows extra resolutions for Component Video[/li] [/list] [url=http://support.amd.com/de/gpudownload/Pages/index.aspx][b][color=blue]Download Ati Catalyst 9.4[/color][/b][/url] | |
8 Antworten 48570 Aufrufe |
Windows startet, aber Bildschirm bleibt schwarz Begonnen von Marc92w
14. März 2009, 12:00:58 Hallo zusammen, ich habe folgendes Problem: Heute ging mein Bildschirm während dem ich einen Film gesehen habe plötzlich aus und meldete, er habe kein Signal. Windows läuft noch (Ton des Films läuft ohne Störung weiter), ich bekomme keinen Bluescreen sondern habe schlicht und einfach kein Bild mehr. Nach mehrfachen Versuchen, die laufenden Anwendungen zu beenden, um zu sehen, ob das Problem von diesen verursacht wird ging der Bildschirm wieder an, aber nur wenige Minuten später wieder aus. Da sich danach nichts mehr getan hat, habe ich den Computer neu gestartet. Ohne Erfolg: Windows startet zwar (ich höre den Sound der beim hochfahren vor der Benutzeranmeldung zu hören ist) aber der Bildschirm bleibt schwarz (zeigt die Meldung "Kein Signal" und geht dann in den Standby Modus). Hat jemand eine Ahnung woran das liegen kann? Liegt das Problem vielleicht an der Grafikkarte? Oder hab ich mir womöglich einen Virus eingefangen? ?( Mfg | |
8 Antworten 6747 Aufrufe |
Musik Ordner Heißt auf einmal "Music" und das icon Fehlt Begonnen von Robin99
07. März 2009, 20:49:27 HI Leute :] Ich habe hier mal wieder ein doofes Problem mit meinem Musik Ordner. Also: Ich habe (Wie eigentlich jeden Samstag :D) Eine Datensicherung von MS Durchführen Lassen!(Mit diesem Sicherungsprogram) Danach öffnete ich mein Startmenü und sah das da irgentwas komisch war. Der Eigentliche Musik eintrag hieß plötztlich "Music". Das Schlimmste ist aber das das Icon fehlt und nur ein Normales Ordnersymbol erscheint. Was Kann ich tun ?( Hoffentlich könnt ihr mir helfen :wink | |
8 Antworten 6521 Aufrufe |
BILD.DE startet sich automatisch sobald nicht gearbeitet wird Begonnen von bikebernd
05. März 2009, 23:16:50 Hallo Zusammen, seit 2 Tagen startet sich BILD.DE automatisch auch wenn ich keine Verbindung mit Internet-Explorer hergestellt habe. Der Bidschirm wird dann schwarz und in der Mitte ist dann das Bild-Logo und danach kreisen Bilder mit den neuesten Nachfrichten um den Bildschirmmittelpunkt. Es wird abwechselnd eine der kreisenden Nachrichten am oberen Rand angezeigt. Durch anklicken kann man dann die komplette Nachricht sehen. Alle paar Minuten werden die Nachrichten aktualisiert, Datum und Uhrzeit werden dann rechts unten angezeigt. Ich will aber keinen automatischen Start von Bild, da es sich immer ungefragt einschaltet wenn man z.B. eine e-mail liest usw. Ich bin mit Kabelmodem von Kabeldeutschland mit dem Internet verbunden. Ich hoffe es kennt jemand das Problem. Gruß Bernd | |
30 Antworten 28264 Aufrufe |
Windows Vista Home standart ; ohne cd oder recovery Begonnen von XVistaAX
« 1 2 3 04. März 2009, 10:20:32 Hay, hab ein problem (sehe bild) habe windows viste home premium und möchte gerne mein vista repparieren aber ohne das ich meine gatzen sachen verliere als ich mein pc gekauft hab war vista schon vorinstalliert also hab keine cd oder recovery die wiederherstllung geht auch net da steht immer auch wie oft ich es benutze die wiederherstelllung konnte net erfolgreich verwendet/angewendet werden :D ?( Vielen Dank | |
14 Antworten 8087 Aufrufe |
Vista x64 Problem :( Begonnen von zweipackk
01. März 2009, 17:29:48 Hallöchen Habe folgendes Problem mein OS Vista x64 stürzt öfters unerwartet ab, dabei ist es egal welche Anwendungen laufen oder nicht ist also kein Softwareproblem. Ich habe auch Prime95 24h laufen lassen können und es gab absolut keine Probleme oder Bluescreens. Auch Memtest86 fand keine Fehler. Ich bin wirklich am verzweifeln. Ich habe mir die dump file mal angeschaut und auch schon gegoogelt aber bezieht sich leider alles nur auf xp und hilft mir daher nicht weiter... Zu meinem System: Intel i7 DDR3 Ram Nanya 1333MHZ ATI HD 4870 In der Dump file steht problem caused by hardware, leider kann ich damit nicht viel anfangen vllt. könnt Ihr mehr herauslesen. Ich bin über jede Hilfe sehr dankbar. Danke schonmal im Voraus Jetzt die dmp. file: Microsoft (R) Windows Debugger Version 6.11.0001.402 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\Windows\Minidump\Mini030109-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available Symbol search path is: *** Invalid *** ************************************************** ************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * ************************************************** ************************** Executable search path is: ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Machine Name: Kernel base = 0xfffff800`01e4e000 PsLoadedModuleList = 0xfffff800`02013db0 Debug session time: Sun Mar 1 13:21:37.144 2009 (GMT+1) System Uptime: 0 days 1:31:08.101 ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2 *** WARNING: Unable to verify timestamp for ntoskrnl.exe *** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe Loading Kernel Symbols .................................................. ............. .................................................. .............. ............................. Loading User Symbols Loading unloaded module list ................... *** WARNING: Unable to verify timestamp for hal.dll *** ERROR: Module load completed but symbols could not be loaded for hal.dll ************************************************** ***************************** * * * Bugcheck Analysis * * * ************************************************** ***************************** Use !analyze -v to get detailed debugging information. BugCheck 124, {0, fffffa8008932030, be000000, 800400} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** Unable to load image \SystemRoot\system32\PSHED.dll, Win32 error 0n2 *** WARNING: Unable to verify timestamp for PSHED.dll *** ERROR: Module load completed but symbols could not be loaded for PSHED.dll ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_SECTION_DESCRIPTOR *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** *********************** *** *** *** *** *** Your debugger is not using the correct symbols *** *** *** *** In order for this command to work properly, your symbol path *** *** must point to .pdb files that have full type information. *** *** *** *** Certain .pdb files (such as the public OS symbols) do not *** *** contain the required information. Contact the group that *** *** provided you with these symbols if you need this command to *** *** work. *** *** *** *** Type referenced: nt!_KPRCB *** *** *** ************************************************** *********************** ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* ************************************************** ******************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ************************************************** ******************* Probably caused by : hardware Followup: MachineOwner --------- | |
3 Antworten 7623 Aufrufe |
MOV Datei Unterstützung unter Windows 7 Begonnen von gdi
27. Februar 2009, 01:16:33 Windows 7 soll nun neben Divx/Xvid auch nativ Unterstützung für das Quicktime Dateiformat erhalten. Damit lassen sich nun mit dem Windows Media Player MOV Dateien abspielen. Viele Windows Nutzer werden so nun auf Quicktime und den damit verbundenen Apple Updater verzichten können. Quelle: http://www.techradar.com/news/software/operating-systems/windows-7-to-loosen-quicktime-grip-552193?src=rss&attr=all |
Ich hab meinen alten Grafikkartentreiber deeinstalliert um einen aktuellen zu installieren, bin auf nvidia.de gegangen und habe einen passenden Treiber für meine Hardware gfunden. Beim Installieren aber kam ein Fenster mit "diese Software ist nicht kompatibel..."??
Jetzt steh ich da ohne Gra.Treiber, was mache ich jetzt? Wo krieg ich einen Treiber her?
Mein system:
Grafikkarte: NVIDIA GeForce 7000M / nForce 610M
32 Bit
Vista Home Premium
Danke für jegliche Hilfe!!